Questions & Answers for: replace ignition switch 1999 olds

Ad

Question about 1998 Intrigue

2 Answers

...ignition switch problems Replaced olds 1999 intrigue ignition switch and now the car will notstart. I have reseated the connectors, but still engine will not turnover. Help? I have been able to start ...

Ad

...xomething that i don't lnow about? You have to replace the ignition system, all the 99's came with an anti theft unit built in. The ignition is built into the system, so that could be the reason

Ad

...On Top Of The Steering Column. To Remove This Type Of Switch, Remove The Fasteners Holding The Steering Column To The Dash. This Will Let The Column Drop Down So You Can Replace The Ignition

Question about 1999 Grand Voyager

1 Answer

...ignition switch pooched and if so how to replace It is most likely the starter ,the starter has contacts in it,instead of brushes like the old days,they will do this when it is time to change the ...

...THE MOUNTING BRACKET THEN LIFT OUT.TO REMOVE LOCK CYLINDER PUT KEY IN SWITCH TURN TO RUN POSITION THEN DEPRESS THE PIN WITHDRAW THE LOCK CYLINDER. how do i replace ignition switch 1998 olds

Question about 1999 Blazer

2 Answers

...ignition switch, the starter, or an interlock switch for the transmission postion. The altenator checks OK and has a new battery, 4 weeks old. Any ideas what to check first? sounds like the neutral ...

REPLACE CRANKSHAFT SENSOR IT HAS TO HAS TO BE RELEARNED USING TECH 2 SCANNER.FOR THE IGNITION KEY REPLACEMENT.TURN IGNITION SWITCH TO THE ON POSITION FOR 10 MINUTES WITH ENGINE OFF.WHEN SECURITY LIGHT

...ignition switch on my 1999 Olds Alero and it still won't start what is with the 1999 Alero i have $500.00 in this car and it still gives nothing but problems my car won't start i replaced ...

...mobile, the security light stays on, and doesn't flash. The car will not start. Replaced the ignition switch and the passkey case Did you have a new key cut using a blank that matches the old chip

Question about 1999 Intrigue

1 Answer

...switch used to be able to jiggle steering wheel/shift lever and sometimes get results. Ideas? Did you replace the ignition lock, or switch ? Will it crank if you jumper the solenoid for the starter

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...