Questions & Answers for: replace crossmember

...replace the starter by simply using a 15mm swivel head socket (or 3/8" drive 15mm socket with a swivel adapter). Jack up and support the driver's side of the car so you can crawl under the engine ...

replace a radiator it can be done with basic handtools I would not suggest a used radiator, if at all possible spend a little extra now and buy one with the best warranty (lifetime) available although

...Replace the Crossmember and then Check your Linkage and the Bell housing Bolts on the Tranny. I'm sorry to hear that. Having car troubles can completely ruin your day. I would suggest not trying to ...

replace brakelight in trunk of 300m How do I get at bulb? REMOVAL NOTE: Some moisture accumulation inside a vented headlamp unit is normal. Moisture will vent from tubes or vents located on the back ...

replace the transmission mount on a 2004 crown victoria. police model ? Also, is this a very difficult job, or should i take it to the shop? Thank you!! Check the frame crossmember at the mount. If it

...replace lower control arm LOWER CONTROL ARM REMOVAL 1)Raise and support vehicle. 3)Remove the steering knuckle. Remove the bolts fastening the power steering cooler to the front suspension cradle ...

replace my oil pump but it looks like my crossmember is in the way. Is it easy to remove that crossmember or just pay someone to do it. just remember that crossmember is attached to everything, engine

...replace control arm, you need place jackstands under the frame and lower vechicle so the weight of the vechicle rests on the jackstands and not on the control arms, then remove the front wheel remove ...

How to replace rear crossmember 2012 ford focus if memory serves there is only 2 bolts keeping it on remove bolts and replace cross member simple job unless bolts snap

...replace a front suspension crossmember on a Chevy Silverado 2500 HD 4x4? The crossmember is about 2 feet long, it attaches to the front suspension on both ends. I need to replace a bent one. Nothing ...