Front bumper How easy is it to remove the front bumper cover? if your a hands on guy not to difficult..... support the bumper.... unplug fog lights...unscrew several bumper screws and brackets... pull
need direction on replacing the front hub assembly on the front passenger side It's a press-in bearing. If you don't have the tools to press the bearing, you can still save some money. Here's what I ...
removing front rotors? Remove tire,Remove caliper,Remove the 2 bolts holding the knuckle to the strut,Remove the knuckle from the lower ball joint,Should be 2 or 3 more bolts to remove from the ...
...front bumper, it could be a loose wire or bad connection to the airbag itself. You need to take this to your dealer (or other trusted repair shop) and have it repaired, this is not a do-it-yourself ...
can i easily replace the bumper on a tiburon or does it require welding? No it does not require any welding. It is not real easy to replace. But then again it is not a real difficult job. But it does ...
...front end on a 2005 tiburon? need to install license plate and the holes are only large enough for a screw, it must be stripped, because they dont grab, and im afraid to use larger screws that may ...
Hi, Can you tell me where the Dedicated towbar electrics socket is found on my Hyundai Matrix please. I have a 2004 model. Thanks, Lyn. look up under rear bumper- if never used- most likely tucked up ...
Where is receiver drier on 2004 hyandi tiburon behind front bumper
...front bumper is gone, loose, or broken. It actually has a purpose other than scraping on the driveway or curbs. It forces air up into and thru the condenser and radiator. If it's loose, airflow ...
Question about 2003 Tiburon
...bumper (pictured: PAD - Lid Switch, part number 92736-3A000 "replaces" the existing part 92736-2D000 ("shorty"))) . This NEW part is 2.5mm deeper than the old one (From in front of an open hood it is ...
Usually answered in minutes!
976 Questions
384 Questions
206 Questions
135 Questions
110 Questions