Questions & Answers for: Dodge removing a front bumper

front bumper to get to the radiator If you need to remove the entire front bumper. Remove the 3 Phillips head screws in each inner fender (both sides edge of bumper by wheel). Remove the two 8mm bolts

...front bumper on 2002 durango? If you open the hood and look behind the bumper you will see two bolts on each side(verticaly) almost under the headlight. The have a 18mm head on them. You must remove ...

...front bumper on 2001a dodge ram? There are six bolts where the bumper connects to the frame they have locks on the bolt side so you have to remove the nuts that are located on the inside of the frame ...

...front bumper cover on 2005 durango Okay...I am completely replacing front bumper parts on my '05 Durango. bumper installed (check), energy absorber installed (check), plastic bumper cover.... lol ...

...front number. Ou will see it riveted to the bumper frame of the drivers side. If you remove the screws that holt the top of the bumper to the upper radiator cover and gently pull back on the grill ...

...front bumper cover on a 2000 dodge caravan? https://www.youtube.com/watch?v=BCaZGTz1WLw Not the specific video for your vehicle but this can assist you in the general methods and procedures in ...

...on a 2013 Dodge Grand Grand Caravan? You need to remove the plastic clips and retainers on the front bumper plastic bumper cover. Here is a video link. ...

How do I replace my passengers side fender on a 2012 dodge durango REMOVAL Hope this helps? Labor Operations: Click to display a list of Labor Operations associated with this procedure Mark fender ...

...Dodge Ram 2500... Do I have to remove anything to get to the bolts that hold the front bumper on? Follow the link ...

...front bumper. There are two horns, a high-pitched horn and a low-pitched horn, that are typically mounted on a bracket behind the front grille or bumper cover. To access the horns, you may need to ...