Question about 1994 F150 Styleside Supercab
...Remove the fan clutch (8A616) from the water pump (8501) by turning the large nut, which is part of the fan clutch, using Fan Clutch Holding Tool T84T-6312-C and Fan Clutch Nut Wrench T93T-6312-B. ...
...remove the fan clutch on a 6.0 diesel How to remove the fan and fan clutch on a 6.0 Ford 2005 E350 diesel engine? 4,570,000 miles. Need to replace the vacuun pump. Before servicing the vehicle, refer ...
...remove fan shroud on radiator(transmission cooler lines may need to be disconnected and slide off the fan clutch harness on the RH side). 3.loosen fan bolts on fan clutch. 4. use fan clutch tool to ...
...Remove the fan and clutch assembly from the fan's pulley. The assembly attaches to the pulley with several bolts on the circumference of the pulley. To remove the bolts, position an open-end wrench ...
remove the fan as well or just unbolt the clutch? Your almost done! Remove the fan and clutch as one then unbolt the fan from the clutch. Install fan onto new clutch and reinstall back onto water pump
...Remove the fan from the engine Fig. 4: Slide the fan as an assembly up and away from the radiator. Be careful not to dislodge the mounting stud on the left side. Remove the retainer and the fan from ...
...remove the fan clutch from the water pump. Remove the upper mounting bolts from the fan shroud. Remove the fan shroud from the radiator by lifting the shroud and pushing inward. To Install: Attach ...
...FAN to remove clutch fan you need to remove upper fan shroud, you need large wrench to remove the fan clutch retaining nut to remove fan and clutch away from the engine drive belt should keep pulley ...
Question about 1987 Ranger
...remove the fan and pulley on a 1987 ford ranger 2.9 v-6? the plastic engine fan is cracking out and i cant get the clutch fan off the water pump. i removed the 4 bolts holding the pulley off ant the ...
...remove the fan shroud and remove the four screws that attach the fan and clutch assembly to the water pump. Once you have removed the fan and clutch assembly, remove the retaining screws that affix ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions