Questions & Answers for: GMC Yukon XL remove the airbag

...where the airbag is.  i brought it to an auto electric guy and he fixed it for $80.  he removed the horn/air bag and just bent the contacts slightly so they no longer came in contact with ...

2008 gmc yukon service airbag soon message Get the vehicle Checked by a real shop SOON. failure to do so could result you getting blown into back seat by a malfunctioning airbag. ... more likely the ...

...XL K1500 4X4 Blower Motor Removal & Installation Delphi Blower Motor Replacement (Delphi) To Remove: Remove the instrument panel sound insulator panel (if equipped). Disconnect the electrical ...

what does code B0026 dr frontal deployment loop[stage 1 open] mean This is usually due to an airbag deployment. It's the code for the front left circuit (driver's side). Most likely, the driver's side

I bought a 2002 GMC Yukon XL 2 days ago, as is. (no warranty) The instrument panel acted normally during the test drive but developed an intermitency during the drive home after purchase. Sometimes ...

srs light on The light comes on because the airbag computer has detected a malfunction. You need to have the system checked for codes with a scan tool. You then need to have the cause repaired by a ...

instuctions on how to remove and replace hub bearings on 2002 yukon xl Remove the tire. Remove the caliper and caliper bracket and hang aside. Remove the rotor. Remove the axle nut. Unplug the harness

I HAVE A CODE B0053 & B0051 WHAT IS THIS AND MY AIRBAG LIGHT IS ON? the airbag module need to be replace if the vehicle has not been in any fender bender. How did you get the code? Usually the ...

How do I remove front bumper of Yukon XL 2003? Have removed what is available undercarriage - 6 bolts (2 from each end and 2 from L/R center Try removing the skid plate from under motor then that ...

Removing the airbag I need to remove the steering wheel airbag. Can anyone advise? Video instruction is in the link https://youtu.be/tPeoZAOYkd4 How to remove airbag GMC