Questions & Answers for: removal replacement ignition switch 1999

Question about 2001 Malibu

1 Answer

...with Gm cars and trucks from 1999 to to 2006. It is a big problem but there is no recall that I know of. If that dont work a dealer needs to probably replace and reprogram your ignition switch and ...

Ad

...with Gm cars and trucks from 1999 to to 2006. It is a big problem but there is no recall that I know of. If that dont work a dealer needs to probably replace and reprogram your ignition switch and ...

Ad

...ignition switch, instead of the key. See the GM V.A.T.S page for more information. To remotely start a car with this feature, you must bypass the PASSLOCK system. There are two methods of doing so.. ...

...form the steering wheel...your wheels might be turned at a slight angle from the way it is parked, putting pressure on the ignition switch assembly. Sounds like the anti-theft. But not 100% on

...ignition ring (black part) then take off the center dash trim around the radio (grey plastic) un plug the lighter remove two 5/16 screws that hold the radio in slide the radio out and you can access ...

Question about 2002 Grand Prix

5 Answers

...ignition switch as it expects, meaning you will have to either replace the ignition switch (expensive) or bypass the module (easy and inexpensive)-I have done lots of these, requires about 15 cents ...

Question about 1999 Malibu

2 Answers

...ignition switch on the fuel pump and gauge will often not activate and the door locks will cycle on and off. Sometimes the fuel level gauge would cycle on and off several times before it stays on and ...

Question about 2010 Corolla

1 Answer

...Ignition Switch Will Not Turn Off? http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html ----------- Car will not turn the ignition to start? ...

...Ignition Switch Will Not Turn Off? http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html ----------- Car will not turn the ignition to start? ...

...removal The problem is going to be the ignition switch/lock cylinder that needs to be replaced. After you replace the switch you may need to do the passlock procedure which you can just google it. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...