Question about Fisher & Paykel Washer
...rear of the machine when you look down into it, the ability to spin may be affected. There is a lever behind the bowl which activates a switch if the bowl comes in contact with it (when the wash load ...
...rear bearing for the drum. Have it serviced very soon, as you can save it by applying grease. A new bearing will set you back $40 or so and is unnecessary if you catch it now. . If the front felt ...
...rear bearing. Open the door, grab the inner drum and see if you can move it while not moving the outer tub. If you can, then the rear bearing is bad. Fridgidaire doesn't sell the rear bearing by ...
...rear drum bearing at the same time if you're handy, hint, don't lose the bearing spacers.Obviously, any electrical repairs should be carried out by licensed and correctly trained technicians with the ...
Question about DEGX2 Dryer
...bearing supports the rear of the dryer drum. If the dryer makes noise this bearing might be worn out. Replace the bearing if it is worn out. Do not lubricate the bearing, the lubrication will attract ...
Question about DEGX2 Dryer
...REAR DRUM BEARING, the balance or counter weights. THE DRIVE PULLEY- If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and ...
...bearing supports the rear of the dryer drum. If the dryer makes noise this bearing might be worn out. Replace the bearing if it is worn out. Do not lubricate the bearing, the lubrication will attract ...
Usually answered in minutes!
1,514 Questions
200 Questions
88 Questions
87 Questions
45 Questions