Questions & Answers for: ranger oil pressure

oil pressure slow to rise After my 2000 Ford Ranger sits for 10 -12 hours it takes 8 - 10 minutes to get the oil pressure up, any suggestions as to what causes this??? you need to try a external gauge

ranger on cold mornings the oil pressure gauge shows zero for about 5 to 10 minutes. I want to replace the sending unit but can't find it. Pictures would help. THE SENDING UNIT WILL BE LOCATED DOWN BY

oil perssure not steady on 02 ford ranger my oi pessure is 0 unless i keep rpms up Did you check oil pressure with a oil pressure gauge from the oil gallerys in the block. Determine if the oil ...

oil pressure problem well our 2000 Ranger 4x4 overheated yesterday..we changed the thermostat. After that the oil pressure started fluctuating..we changed the oil and the oil filter. Now the oil ...

low oil pressure on guage of my 89 ford ranger 6 cylinder Could be low oil level, a bad sending unit, or actually low oil pressure due to a worn oil pump or worn bearings.

...Ranger with a 4.0 it has 122,00 miles and all of a sudden, Iam not getting any oil preasure I already change out the oil filter thinging it might of been clogged. could it be the oil pump? Check your ...

...ranger with a 2.9 L engine 2.9L and 4.0L engines-Left side front of the engine, below the cylinder head in the engine block. looking for the oil pressure sending unit in a 1987 ford ranger 2.9 liter ...

...ranger 3.0 v6 costant low oil pressure i have 1993 ford ranger with the 3.0 v6. it has an after market exhaust with 5 inch stacks. i recently notice that i have low oil pressure. its still in the ...

...no oil pressure in a 1998 ford ranger 3.0 If your gauge is not reading pressure and your engine is not making all kinds of noise while its running than I would bet that the oil pressure switch is

ranger oil pressure my oil pressure on my 1988 ford ranger v6 2.9L climbs slowly to the "H" at the top of my gauge. It began doing this recently. I have yet to replace anything. I will be replacing my