Question about CrossTrainer Treadmill
...Proform 450 X treadmill. It will power on but as soon as start button is engaged it trips current. Could you help? There could be a combination of problems. I would first start with disconecting the ...
Question about Sport 1000 Folding Treadmill PFTL91205 - !
...rails to this model the screws broke through the rails.where can I fing the rails? Hello. These proform treadmills are prone to the problem you have. Go to http://www.proform.com/ and contact ...
Question about /proform Treadmill Drive/motor Belt 118016
...Proform j8 treadmill (not listed on this site) and lately it has been giving me problems. The belt seems to stop for a split second for every step I take when I am running. Do I need to tighten the ...
Type your problem for a solution...where do you plug in the proform 760 exercise bike? I can not find a place to plug it in.... Tommy McDaniel Dear Sir: Hello I hope everything is o.k I will try to ...
Question about 760 CrossTrainer Treadmill
pf 3.6 treadmill model no petl40507 seriel no 04845 Im having problems with proform pf 3.6. Dash is on but only the speed button is beeping noise everything else is off. I checked the motor Nd it's OK
proform 400gi runs 2 seconds and just stops proform 400 gi Dear Sir:This problem is by lack of LUBE in according with the instruction manual, proceed inmediately. RUn the software calibration for ...
proform 615 xp won't come down from folding it I folded this proform 615 xp in the back to vacuum under it and now it won't come back down for me to use the treadmill..Can anyone help me ...
Question about 760 CrossTrainer Treadmill
I have a Proform 415 CT. When I put the key in place i get a FF code. I've tried unplugging overnight but still doesnt work. How do I fix this problem? I have a Proform 415 CT. When I put the key ...
Question about 395 E Elliptical
I have a 390 proform Elliptical and it's is locked up. When I get on it, the pedals are tight and I can not move them. I have a 390 proform Elliptical and it's is locked up. When I get on it, the ...
Proform 740 cs incline problems. Have run the recalibration, but still will show a jump on the screen from 1-10 without actually raising the incline. You most likely have a wiring harness problem. Get
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions