Questions & Answers for: pro multi fuel heaters

pro multi fuel ran ok last year, started up this winter runs 10min. then shuts off . have no#2 fuel in tank. thanks john This may sound dumb, but is it full? i have a simupar one and if i start it out

All-Pro forced air heater multi-fuel I cannot find part for my heater. Its CBB20 7.5 370VAC 50/60Hz max temp 90*C What does this part do and what is the model of your All-Pro?

...Pro multi fuel 110,000 BTu heater. I checked the eye and drained the tank. If I run the heater without the cover on it, it runs all day. When I put the cover back on , it only runs for 20 minutes and ...

...multi fuel heater running # 2 diesel it souds like it is starveing for air, I would check all of the filters and the air line that runs to the combustion nozzle as it may have a crack or break in it. ...

...electrial connections off of the circuit board. Do you have a wiring diagram for the All-Pro 60,000 BTU multi-fuel heater? Look on the electrical panel that you removed to get to the electrical

...multi-fuel unit that has diesel fuel in it. mod # R115DT my draper diesel space heater run for 1 min than go out Check the flame sensor and clean it if it is sooty or contaminated. Good luck and be ...

...Pro Multi Fuel Kersone Forced Air Heater the igniter get red hot, fan turns on but only stays on for less than a minute and then shuts down. All lines are open but no fuel seems to be flowing. Hi, ...

...Pro 115,000 btu multi fuel heater. When first plugged in fan runs, fuel sprays out the nozzle but heater won't fire. Any suggestions? You probably have already checked this but is the ignitor trying ...

...Pro Multi fuel forced Air Heater 200T, has mouse damage in the control board area. I need a circuit board diagram to be able to replace wiring. Help!! will this work? ...

...PRO SERIES 170T multi fuel heater?? I got this heater for free, it works good just want to make sure it's set right? 15 PSI Manual for 17* series ...