Question about Aquarius WMA42 Front Load Washer
...powder remains in the drawer. I have removed the inlet pipe, cleaned the drawer and inside with bleach and put the washing machine on at 95 wash (empty) Any suggestions Depending on which compartment ...
Powder drawer wont open Cant get the powder drawer to open and the water is coming out all over the floor when I try to turn it on Grasp the drawer firmly, and pull out until it reaches its stop, then
Question about Aquarius WD640 Front Load Washer/Dryer
power to solve the tablet. In that case check spray arms and impeller pump.Also check water temperature. If the problem is also happening with powder, then it is probably a drawer not opening on cycle
...powder. Open the drawer and look at it carefully, you may need a flashlight. See where you pour the powder in? Well... you know what they say about pictures and a thousand words... Since I don't have ...
Question about Aquarius WD640 Front Load Washer/Dryer
...powder drawer. Can you help? Yes, this washer does have a heating element. Make sure there is a good water pressure at the inlet valve/s, or the powder will not dispense. Make sure there is no ...
...powder drawer - (open it fully then pull upwards and outward at same time) - then wash it it with warm water, get all the old bits of powder cleaned away soak it it hottish water for a few minutes if ...
...powder drawer, I think it needs to be cleaned inside but I can't get the drawer out There is usually some kind of plastic clip or lever that you depress or lift up to release drawer, it varies ...
Question about AWM5125/1 Front Load Washer
...powder/conditioner drawer. I have an AWM 5125 front loader 1200 rpm. The machine leaks water from the front powder/conditioner drawer when running. If I pull the drawer out to little way, it does not ...
...powder is wet and clumpy but is still left in the dispenser. I suggest you remove the soap dispenser drawer and thoroughly clean it, ensuring that the outlet at the back of the drawer where the water ...
Question about Wm & Wma Models Washing Machine Motor Carbon Brushes
...the powder drawer not completely and correctly or having crack in the drawer or having the high water pressure in the Water pipeline network check all above , if not , call service center thank ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
