...phillips screw. After removing the screw, pull the marker lamp assembly towards you. It may be real tight, if it has never been removed before. You need to pull the light assembly out of 2 retention ...
Question about PT-43LC14 43" Rear Projection HDTV
...lamp ourselves....HELP! Using a phillips head screw driver, you need to grip the unit with your left hand and then push really hard against the screw head before starting to turn the screw. They are ...
Question about PT-43LC14 43" Rear Projection HDTV
I have a Phillips rear projection 60 color lamps off focus I have a Phillips rear projection 60" HD TV model # 60PP9202/17F. the lamps are off center and the picture is over lapping in different ...
Question about 42PFP5332D 42 in. Plasma Television
...phillips 42 inch plasma tv is 2 years old and just clicks when I turn it on.It would click for about 30 minutes and then come on, but yesterday it did not come on at all. I read on line that ...
Question about 50PL9126D/37B 50" DLP TV
lamp in my Phillips DLP TV How hard is it to change the lamp in my Phillips 50 PL9126D/37 remove the screws (12) holding the lower back on. loosen both silver screws on the left side of the lamp assy.
...lamp which is also held in by two phillips screws, these screws only loosen and do not completely remove from the lamp. 5. after loosening the screws there is a handle in the center of the lamp, take ...
Question about KDSR50XBR1 50" Projection HDTV
The original was a phillips. Could the issue be that the replacement needs to be Phillips? you need to push the new lamp all way in and down a little this set has a microswitch at the end of the lamp
...position. Make sure that the handle is locked. 8. Tighten up the screws (c) using a Phillips screwdriver (+). 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp
Phillips screwdriver (+), andremove the lamp cover (b).3. Loosen the screws (c) using a Phillips screwdriver (+).4. Pull up the handle.5. Pull out the lamp box by the handle while holding theprojector
...Phillips TV. If LCD - could be the lamp just getting old (lot of hours on lamp). Could find the model # of the TV and do a Google search of the TV Model # to find a replacement lamp. If its an older ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions