Questions & Answers for: pebble 2

...pebble i can't find all the screws to take the cover off of my phone You have to carefully pull the lens off of the screen, it just has some light glue on it and under the lens there is 2 #6 tork ...

my PEBL Motorola mobile phone will turn itself off 2/3 times a day without any apparent problem. ok pebbles as mine tends to do that when you close the flip part to fast just slow down and it should ...

...Pebble 3 says feeder error but there is not. It won't pick up a card when you try to print but when you press the push button it feeds out a card without printing. It will alos not print a test card. ...

...but wont wash, soap dispenser opens,also my 8 year old put a toy in it with alot of sand and small pebbles since that it wont wash i took it apart and cleaned the large round filter had sand and

...pebble unlock code you can get the unlock code by calling the network service provider its 5-20 days or you can get the unlock code by the third party its take 2-12 hour this website will help you a ...

...prints 2 cards. I have an Evolis Pebble 3. Clean all transport rollers . check for X offset by giving Rx command in Properties/Tools/dialoge with printers. Increase offset little bit using Px ...

...Pebble 3 ink ribbon breaks after I print 2 cards. First clean Rollers and print head . Check if you have increased luminosity and contrast too much in printer Graphic properties. If this doesn't ...

my mouse connects but won't work on my mouse pad or most other surfaces One of three things is the problem: 1. the mouse is dirty underneath. Clean it with soap and water. 2. the surface isn't

Pebble-Shaped Pop-Up Note Dispenser: 1) In order to remove the lid from the dispenser you will need to twist the dispenser in half. While holding the top of the dispenser with one hand, use your other

Just received new JBL pebble speakers, they work when usb plugged into computer and aux chord into phone, but dont work when aux is plugged into computer try usb to computer