Questions & Answers for: parking break

...parking break wire. Is it necessary to connect the parking break wire for the unit to power up? It's not powering up, even after resetting the unit. Try grounding the parking brake wire instead of ...

Parking break light My parking break light flashes like it is giving a "service engine soon" code of "13". Parking break light switch appears to be in good condition. check the breaks. does it have ...

Parking break light is always on (1994 Toyota Previa) The parking light always stays on, eventhough the break is fully released. This also prevents the cruise control from working. Where is the switch

PARKING BREAK ON A 1997 MERCURY MOUNTAINEER I'M A WOMAN AND FIGURED I COULD FIX THE PARKING BREAK ON A 1997 MERCURY MOUNTAINEERI TOOK IT THOUGH INSPECTION AND IT STATES THAT THE PARKING BREAK DOES NOT

...Parking Break or EPB), located on Dash-board marked as (P), (left to the lamp-knob). -See left to the Steering-wheel You can also check visually on the address below - ...

parking break is a stand alone cable that can be adjusted if you climb under the vehicle. depending on your parking break location in the cab will help you better locate it under the car IE if you set

...parking/emergancy break will stop it. Does the parking/emergancy break only lock the back wheels, front wheels or independant of them? The front breaks are 50% and the back breaks are 20%. This is my ...

...parking break light stay on in my 97 Olds Cutlas Supreme. I have checked the level of the break fluid and it is full. I did have new break lines put in last year. I did have to slam on my breaks ...

...break/parking lights, the connections are ok. I read that it could be an earth wire, so was wondering where the earth wires for the lights are?? Check for dual filament lamps installed backwards and ...

...car but it says warning must set park break & my park break is set but it still won't start. Pull the stereo out and look for the parking break wire on the back, take that wire and ground