Questions & Answers for: pajero gdi fuel pressure

...pajero io GDI(1998) and it start make me problems with the acceleration.when i m driving it start losing power and when i press the petal violent it start responding normally.the diagnostic dint show ...

Pajero 3.5 (6g74) wont start. Switched off at home and an hour later it will not start. Sound like for a second or two the engine wants to fire up but does not take. Done diagnostics with Launch X431,

pajero gdi fuel pressure the car is losing speed at full throttle and wont gain speed at full throttle Have a pressure test done on the fuel manifold to eliminate problems in the pump-regulator ...

...Pajero IO 4G94 GDI engine:I am changed new fuel pump in tank,its pressure is good.And than I'm also test front fuel pressure pump too good.But engine isn't start to running.what's wrong in this and ...

...Pajero io 2002 4G94 GDI auto idles perfectly but when put under load it misfires badly. It does not seem to me to be electrical as there is no problem at idle & you can feed power gently w I have ...

the Mitsubishi pajero GDI and the fuel pressure sensor? Mitsubishi pajero GDI engine number 6G74 model GH-V75W. LRUCO I don't think there is a pump, it is done with engine oil pressure at the injector

Pajero 1998 V6 3500 GDI that won't start. the fuel pump from the gas tank has been replace and the GDI pump has been repaired.the car has been scanned no problems need help ? gasoline direct injection

...Pajero io gdi 2003. The car drives for 15-30 minutes then it misses and die. Seconds later restart good again. Cycle continues like this run fault codes and look for EVAP system not ventilating the ...

...Pajero io GDI 2003 High Pressure fuel pump shows very weak flow from the return line. It is spitting out instead of flowing. Is it suppose to be like that What do i do. Thanks test the fuel pressure ...

...pajero io GDI 4g93 petrol cranks but won't start. before this it started losing power and when o checked fuses, replaced fuel pump in the tank car won't start now. what could the problem? Check the ...