Questions & Answers for: oldsmobile silhouette circuit

Question about 1999 Silhouette

1 Answer

...circuit I hooked a code reader up to my 1999 olds silhouette van and it read P0742( torque converter circuit stuck on). What does this circuit consist of or does it just mean my coverter is shot. ...

Ad

Oldsmobile Intrigue got trouble code i got the trouble code P0742 and it's saying the Torque converter clutch circuit stuck on Go to the provided link for explanation and trouble shooting of this code

Ad

...Oldsmobile Silhouette It is usually a wire like gadget which projects down into the coolant overflow tank. If the coolant gets too low, an electrical circuit is closed (or opened) and a warning light ...

...Oldsmobile Silhouette 3.4L Starter stays engaged at times. 03 Oldsmobile Silhouette 3.4L Starter stays engaged at times. Continues to turn with engine running, then kicks off. Sounds like time for a ...

Question about 1996 Silhouette

1 Answer

...Silhouette. Car cranks ok but does not start. What should I check? Thank you 1) Is the ignition circuit ON? (are you getting spark) 2) Is there fuel getting to the engine. 3) Is there air getting to ...

...Oldsmobile Silhouette - Right tail lights work, but brake light, turn signal, and back up light do not. What could be the problem? I would suspect the circuit board on the back of the light or a bad ...

...oldsmobile silhouette? did not pass emissions test code 0449 evaporative emission  control system vent valve solenoid circuit  malfunction  check your fuses as well as connections and ...

...Oldsmobile Silhouette 3.4 liter has a no crank no start issue. Replaced battery and cleaned connectors which were really clean. Replaced alternator and spark plugs 4 months ago. There is clicking ...

Oldsmobile Silhouette gas gauge, circuit board and arm are not making good contact? Circuit board and arm are not making good contact in gas tank. You must replace the fuel level sending unit, it is ...

tail light lens broken in Oldsmobile silhouette 1999. Does the whole assembly need to be changed You can replace just the outer shell, but suggest replacing the inner circuit board also.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...