...stuck in nutribullet I took it apart by removing the rubber spindle and three small screws. Then soak it in vinegar and rinse to remove food gunk. Lastly, re-lube with cooking oil (I used olive oil) ...
How do I release lock mode on majic bullet? Stuck in lock mode Push down and twist. https://www.nutribullet.com/customer-service.html
The cup and blade are stuck in the machine? Any idea how to get it out? take it apart and so relieve the blade I have never had one and don't even know what one looks like, but almost certainly you ...
nutribullet manual Only used for 2 weeks with big cup then tried small cup and it is stuck on machine after mixing. Had to turn off at switch.Still does not click open from base. ...
how to open nutribullet jar stuck on blade base? try heating the jar with hot water before removing it
Question about Nutribullet Blender
How do I remove the nutribullet jar that is stuck to the blade housing? strip the housing to release the blade, it is the only way to go.
...stuck NutriBullet I put it in the fridge Use warm running water on the threads, keeping the cup end down towards the sink. Keep water away from electric motor unit end. Gently twist after 30 seconds ...
Question about Pro 900 Series
nutribullet works but will not stop and i have to pull the plug The switch, that is enabled when you attach the container to the motor housing, is stuck. Look carefully at the rim of the motor housing
...nutribullet recently. All three parts of the grip and starting mechanism were stuck. I took the machine apart and found where the grips operate up and down on coil springs. Took them out, placed some ...
...stuck with cup on, cannot get off. nutribullet stopped spinning and now cup is stuck Mark, You can try freeing the vacuum created by prying on lid or any tabs with fork or butter knife, and then ...
Usually answered in minutes!
71 Questions
68 Questions
53 Questions
57 Questions