Questions & Answers for: Toyota noise when turning right

Noise (vibration) when turning right Grinding noise (vibration) ONLY when steering right. Noise is speed dependant (not RPM). Noise continues if shifted into neutral (with vehicle is coasting) Most ...

...noise when turning (left or right) but the noise will disappear if you tap on the break paddle. sounds like you have a sticking brake calipar that is rubbing on the rotors when turning left or ...

...right, clicking noise and I was told that the bearings in the axle are making the noise and I will eventually need to change the axle. What is your opinion? toyota uses lower quality axels like mazda ...

...right and to the left...did the noise go away??? I think on one of those turns it did...if it went away on the left turn the left front wheel bearing/hub assembly is bad and needs replacement, if it ...

noise is more pronounced when turning in a certain direction it is generally the opposite wheel bearing at fault (eg. turn left noise worsens, means right side wheel bearing). The reason is the weight

...noise, when turning to the right the weight of the car shifts to the left placing more load on the left wheel bearing and takes load off the right bearing. Corrollas are front wheel drive. I have ...

...noise when turning for the first time when cold When I turn the steering wheel (right or left), the truck makes a noise in the front end. But ONLY for the first couple turns, then it's fine until it ...

...noise gets louder turning right then the left front wheel bearing is the problem, the same for turning left, the right front bearing would be the problem. If the noise stays the same and changing on ...

turning the steering wheel, either left or right! Just had bushings replaced, and the noise started again. Sometimes you can here it while driving, and when making a turn, left or right! the cv joints

...noise is still there. Louder when turning left, almost nonexistent when turning right. ...