Questions & Answers for: lug bolts

lug bolts on rear wheels Can the lug bolts be replaced without pulling the axle and what is the easiest way to do the job. Have ample tools but limited knowledge of car, belongs to son-in-law and wont

lug bolts on my 4 lug bolt tire broke off. i bought the new lug bolts, put them on, and now my tire is wobbly and sounds weird. sos assuming the bolts that broke, broke while the vehicle was in motion

...lug bolts. Raise and safely support the vehicle. Loosen all, and remove all but one of the CV joint to stub axle bolts retaining the halfshaft to the transaxle flange. If necessary have an assistant ...

...lug bolts. Then you have to tap the rotor away from the hub. This took a little work. Then check each of the lug bolts by screwing the lug nuts on them. They should go all the way down by hand. If ...

...lug bolts have been put on by an impact wrench, this could turn out to be a real issue. The correct procedure is to tighten the bolts using a torque 'stick', or on the final tightening, use a torque ...

...lug bolts have small serated splines and are hammered or pressed in from behind. You did not say if it was drum or disc, front or back, lug nut or lug bolt style, etc. All this is essential to know ...

...lug nuts and tire. Remove two bolts holding the caliper in place. Remove the the two bolts holding pads in place. Hang caliper with a wire from wheel so brake line is not stressed. Mount new calipers ...

...lug bolts out to new one. Plan to change all for bolts and lug nuts for this tire. take tire off, take brake caliper off, remove rotor, take nut and bearing off, then hammer out old studs and hammer ...

the lug bolt broke when i removed the nut. to fix the brakes. how do i get the lug bolt out? jUST TAKE ALL THE LUGS NUTS OFF & REMOVE ROTOR WITH A 5 LLB SLEDGE HAMMER KNO0CK BROKEN BOLT & ...

bolts to following torque: 40 ft. lbs. (54 Nm) with 9.5 in. 3-lug converter 55 ft. lbs. (74 Nm) with 9.5 in. 4-lug converter 55 ft. lbs. (74 Nm) with 10.0 in. 4-lug converter 270 in. lbs. (31 Nm) with