Questions & Answers for: loose fender

...loose inside fender area but cannot figure how to remove from fender hole at top. Please tell me correct procedure. If there is a slot in the "fender hole", it unscrews with a big screwdriver If not, ...

...out under the car at the fender, lastly take all the bolts along the fender out, and gently pry it ...

...on my car? they screw on but it has a piece on fender if this is loose u have to take fender off to get to it .some times when u unscrew the antenna it will break off then u have to take fender off

fender 90% loose only to find you can't get some bolts loose without some help. My fenders were pretty rusty but luckily the structure underneath was good yet and I was able to just put on new fenders

...Fender site. seems like a simple loose wire, but no idea where it came loose from. thanks in advance for help! All Strats are wired in similar fashion. There are lots of straight-forward wiring ...

...horn just stoped It's in betweenthe inner fender and the fender itself. You have to take the front of the inner fender loose to find it. Your fuse or horn relay may be bad. relays are

...are not in a position that they might possibly be pinched by the fender and having done that loosely install both fender mounting brackets using on each side, the two nuts that were previously ...

...for metal. Obviously the fender is not coming loose Your referring to trim-- I guess See a body shop for the correct professional adhesives,they can properly clean the area & re stick it ...

...remove left front wheel and splash guard. remove more bolts in wheel well open left door, remove bolts in sill by door hinges. Take lots of wires and stuff loose from fender. Tada, fender is

...loose from my fender and when I put it back on my windshield wipers turned on,need help ASAP thank you. You should disconnect the battery first as you appear to have a short. Look for a broken or ...