Questions & Answers for: loose dash

I would suggest checking your fuses for loose or burnt out ones, as well as checking for loose wiring in the dash unit itself which a mechanic should be able to diagnose. not sure if that helps at all

...dash behind the information display ( speed, gas, etc ) you will find wires that are loose..you will have to replace them. i have a 1983 Olds Regency 98 that had the same problem. udually the dash ...

...It is probably a loose ground wire. If it only does it while hitting bump, then there is a loose wire somewhere. It may be loose fuse but probably loose wire or solder joint going to dash control ...

...LIGHTS STARTED WOULD GO OUT WHEN I HIT THE DASH THEY WOULD COME ON . NOW THEIR IS NO LIGHTS AT ALL WITH A TAP OR A BANG. you either have a loose wire coming to your dash, bad bulbs, or a loose ...

...loose behind the dash. Thanks for any help that can be offered. Do this, when the vibration starts, place your hand over the area and indeed verify the location. Next, check the area for loose ...

...fan switch to the motor someplace. Banging on the dash makes temporary connection of the loose connection problem until the next time you try it. It is possible too that your fan switch is

on chevy s-10 1990 fuses okay all the other lights work except for the dash. Bulbs or cluster bad NO DASH LIGHT FUSE GOOD DASH HAS POOR GROUND DUE TO LOOSE OR BROKE WIRE OR DASH FAULTY NEEDS REPLACING

...loose everything HelloThe dash lights brightness are controlled by a dimmer rheostat in the dashner the headlight switch, it is a thumb wheel or similar type of switch. It is either defective or ...

loose ground under dash-check fuses on the parking lamps cheers Denny SOUND LIKE LOOSE OR FAULTY TAIL LIGHT FUSE. Tail light fuse is in wiring with dash lights. It is like that because you can know if

...dash blinks on and off everytime i use brake pedal Sound like a bad or loose ground, loose plug, fuse, feel around area above brake pedal and gently wiggle wires to see if you can duplicate dash ...