Questions & Answers for: logixx 10

bosch logixx 10 washing mashine How do I open the filter door on the above machine as I suspect it is full of animal hair. just turn filter cap. outer door is just a hinged flap

...logixx error code: e24? 1. Turn it off 2. Turn it back on 3. Hold the start button for 10 secs 4. Let go and you should hear the pump run for 1 min. The unit will reset 5. You should be good to ...

Puddle of water at bottom of fridge Is it easy to fix or better buing a new one, It is 10 years old. there should be a drain channel at the rear of the fridge with a drain hole,this is probably ...

...logixx 8 front loader washing machine door won't seem to close properly, although we are doing nothing different from normal (I think!) - the red light beeps and flashes as if it's on pause, even ...

...Logixx WTS84516GB Condenser Tumble Dryer, still new. After starting the dryer working properly for a short time (10-15 minutes)then the time goes to one minute and after that finish (Stop) with all ...

water does not run into the machine Despite checking that water can run through the inlet pipe (into a bucket) the water does not run into the machine. I think I can hear the pump trying get the water

...logixx 8 is activated and i cant turn it off Hold the Start/Pause button for 8-10 Seconds. This usually does the trick. Kind Regards * If you found this solution helpful, please rate 4 thumbs up and ...

Logixx 10 tumble dryer, turning but no heat, have tried to remove the back to see if there is a reset switch or is the element gone? anyway have removed all the screws that I can see, but although the

...logixx 8 error code 80 As soon as a programme is selected E:80 appears starts flashing and get a loud error beeping noise Only 10 days old Unplug the unit from the wall for 5 minutes and see if it ...

Logixx Dryer Condenser run for 10-20 minutes then stops, flashes the 'Start/Stop' button, inside light goes off and then after a short delay comes back on again and continues flashing? On pressing the