Questions & Answers for: SuperMicro where is it located

Powers on, but no video Hi, It's runs on Linux Fedor Core7. The pc powers on, but no signal on monitor. I don't even see the initial booting up text scroll up on the monitor. It's not a monitor issue,

I have a supermicro processor x7dae with a row 0 channel 1 fault. I have a supermicro processor x7dae with a row 0 channel 1 memory fault on bank 3. can you tell me the board location of the dimm to ...

After BIOS upgrade from fdd motherboard C2SBX Supermicro does not starting. Coolers are starting, but not video and not starting BIOS. Reset the bios (use the proper jumper or rmove the cmos battery ...

computor was working normally, was packed up and shipped to different location. now when i power it up the fans start running, 4 red diodes light up d1-d4 (not sure if that is normal), and nothing ...

driver superMicro PIIISEA chipset Intel 810E The drivers located under http://www.supermicro.com/support/resources/resource_drivers.cfm

motherboard beep sound The "beep codes" are located in your user manual in Appendix B

download chipset suprop4spa+ The drivers are located at: http://www.supermicro.com/support/resources/resource_drivers.cfm

date/time date and time are lost, even after replacement of battery, Can else can be wrong ? There may be a bad connection in the CMOS battery housing. The battery should make an audible click when it

...of the serial number depends on the type of the server: Blade serial number (SBI... or SBA...) is located on the side Blade Enclosure serial number (SBE...) is located on the rear side CMM (chassis ...