Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television
...jumper for the color wheel located. i replaced the color wheel and the dark colors are very foggy this may fix my prob. With the back off of the unit, you are looking at a silver can on the light ...
...light on the front blinks. if the lamp lights then shuts off,then all three indicators blink,"timer","lamp",and "temp". the lamp amp board has a 350vdc input. im waiting for the rear cover ,lost in ...
Question about HLP4663W 46" Rear Projection HDTV
...light engine---if the jumper needs to be removed you will have a working set but the color will look odd--usually missing blue or red---it is a small two wire plug with a jumper and can be removed ...
Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television
...light engine -----if the plug is there remove it with either a small needle nose pliers or a hemostat. Things looking blue point to the jumper that just needs to be removed. Let me know what happens. ...
Question about HLP4663W 46" Rear Projection HDTV
...jumper if it has it usually causes the color to look funny blue instead of normal. It is located on the DMD board--the metal box on the light engine where the two plugs from the color wheel are. It ...
Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television
...jumper if it has it usually causes the color to look funny blue instead of normal. It is located on the DMD board--the metal box on the light engine where the two plugs from the color wheel are. It ...
Question about HLP4663W 46" Rear Projection HDTV
...of the light engine ) You will not have to remove the light engine and you can usaly find it by looking thru the small openings on the sheild, simply remove this jumper with small needle nose ...
Question about HLP4663W 46" Rear Projection HDTV
...jumper, what is this? on the dmd pcb that the one on the back of the light engine the should be a small opening in the metal shield with a little black jumper over two pins remove it and should take ...
Question about HLP6163W 61" Rear Projection HDTV-Ready Television
...into TV from the back). You don't have to remove the light engine, just the rear cover. Use needle nose pliers to pull out the jumper. It should look something like this: I hope this was
jumper. Help please?????? IF it is there it is in a tiny opening on the DMD board which is the metal box at the rear of the light engine that the color wheel plugs into. On the side facing the rear of
Usually answered in minutes!
445 Questions
373 Questions
297 Questions
280 Questions
244 Questions
