Questions & Answers for: Oldsmobile Cutlass Supreme light i c jumper

...to start it it wont start. When I let the jack down one time it started, then nothing again. The lights come on (all of them with out dimming) and stay on even when you try to start it. I ran a ...

...fuses with a test light do you mean a jumper wire to the pump itself ? if so follow the wires up and ensure they are not corroded or broken also a test light will determine where power begins and ...

...light bulbs have all been replaced. What is the issue? In the trunk, on the drivers side is an electrical disconnect. Get a really good look at the wires going to this plug. Many of those cars used ...

...jumper two terminals in the test plug under the dash, and then watch the check engine light  flash.  If it is OBD-2 you need a code reader or scanner. Most auto parts stores will read OBD-2 ...

...jumper wire between the two pins of the connector then turn the key to the run position and place the turn signal lever in the left or right position. If the turn signal lights know light up than the ...