Questions & Answers for: Mazda level sensor

...Level Sensor Circuit need suggestions on how to fix that code relates to a short or open circuit and that could be the wiring harness or the level sensor in the tank. it's part of the fuel pump ...

...sensor. After a while, the calibration of the sensors becomes scewed slightly from wear, from pollution and dirt, etc. Performing an ECU reset usually means that the computer goes back to factory rom ...

...to your indicator inside the vehicle. Manually check it yourself when engine is cold and on level ground....check the oil level while you are at it. more detail in your question...... check ...

...sensor, but start with the thermostant and checking the coolant level. Check for coolant fluid level and that it fills the radiator and the overflow tank. Then check that the electric radiator fan ...

...level sensor often fails on Mazda's however, so your 'problem' might actually be a dodgy sensor not a lack of coolant at all. Hope this helps, Sherwin 2003 madza tribute the lights when on and the ...

is the fuel level sensor the same as the map sensor? no they are not the same map sensor is manifold air pressure and fuel level sensor is the tank level sensor

...to the level of the sensor it will cause this if so simply add some coolant if not see if you can flush out the coolant expantion tank there might be something causing the sensor to send false

...Level Sensor Problem Does anyone know if the MAF, IAT, MAP and Coolant Level sensors on a 2003 Mazda MPV, 3.0L has a shared wiring harness connector??? Having starting issues on the MPV. You can get ...

...sensor. Check the fluid level!! there are sensors inside the gearbox, starting on a hill would give a different reading to the flat, worth a try, auto wont work properly if fluid has either got too ...

level sensor is intact as it needs a complete circuit through the unit and coolant to operate correctly. I had the same problem and took my vehicle to the mechanic and was told that the issue might be