...sensor measures the toner level inside the developer unit. Try swithcing on/off, open/close the front door to clear the error code. If this doesn't work, you'll need a technician to reset the ATDC ...
...level of toner (normal average is between 6% to 8%).3. Clean the ATDC sensor.4. The CMY ATDC sensors can be swapped for diagnostic purposes.5. Check and reseat the connectors on the back of the LED ...
...sensor level detected on the black I.UIt normally happens when customer does not replace the toner when prompted.It can usually be cleared by opening and closing the front or right side covers thus ...
Question about Magicolor 3730 Dn Color Laser Printer
level sensor for each color: 0F52H Toner level sensor /Y malfunction 0F53H Toner level sensor /M malfunction 0F54H Toner level sensor /C malfunction 0F55H Toner level sensor /K malfunction -- Relevant
Open the toner bottle door,rotate the bottle mannualy 90 degr.and turn the copier ON.If the bottle rotated verify the toner level in the developing unit.If not rotate check the bottle motor and sensor
minolta codes 46-25 code konica 7075 Level Adjustment error. Has the drum and the developer unit and developer been replaced? Has the drum unit/assy. been cleaned including the sensor!!!!!!!!!
Bizhub C35 error code 0F54 What is this error code Cyan (Blue) Toner level sensor error, using OEM toner???? or third party?
level sensor for each color: 0F52H Toner level sensor /Y malfunction 0F53H Toner level sensor /M malfunction 0F54H Toner level sensor /C malfunction 0F55H Toner level sensor /K malfunction -- Relevant
...level sensor or whatever simple. It will tell u what circuit of what sensor is affected. Trace wires. 95% of electrical issues are from abrasive movent or being smashed. Visible check wires If abs ...
Toner Level Sensor konica 2223 what about the toner level sensor for the Konica 2223????
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions