Pull cord is loose on my Honda 2500 Pressure Washer unable to start engine. complete pull rope units are available for appx $23
Question about Maxus Prosumer MX5223 Pressure Washer
Describe your Honda Maxus Prosumer 2750 PSI Pressure Washer w/ GX & CAT Pump - MX5223 Problem keeps dying if it has a bowl on the bottom of the carb you float might be stuck, and check if ...
retentioning a pull cord how do i retention a pull cord? do i pull the assembly off? yes
engine reves up & down under pressure when wand is pressed it won't hold pressure. The engine reves up and down Sounds like the bypass valve is sticking. You need to locate it and grease it with a
Question about Maxus Prosumer MX5223 Pressure Washer
Pump does not seem to be working, motor runs good, no pressure Typical causes: hose bib not fully on, kink in supply hose and, #1 - clogged nozzle, particularly after several months of not being used.
engine is on but when i press nozzle no water coming out If you remove the tip, will it work? If so, unloader valve is sticking. Needs to be removed and lubed with lithium grease.
what weight oil do i use in a 5 hp honda ? For normal use I would use straight thirty weight. For colder use I would change to 10W-30.Thank you. I hope this is what you needed.
Hello- what is the oil capacity of a Honda power washer Model XR2600 (2600 PSI) 5HP manufactured in July 2004. Thank you. oil capacity is 20 oz. 10w-30
Question about Maxus Prosumer MX5223 Pressure Washer
honda pressure washer2750 will only run on choke Hard to crank and will only run on choke Check air filter, carburetor may be dirty.
pressure washer won't pull up soap You gotta use a lowest pressure tip or sprayer setting to use this feature tho I never got my own working yet.
Usually answered in minutes!
248 Questions
121 Questions
112 Questions
111 Questions
63 Questions