Questions & Answers for: key won 39 release ignition

Question about 2004 Quest

1 Answer

won't budge. I have the parking brake on and the key out, as directed by the owner's manual. How do I get the transmission into Neutral? Is there something I'm missing? Thanks. try putting

Ad

Question about 2004 Quest

1 Answer

...key won't come out when the car is in Park. Help! What part should the dealer get? This is probably the ignition lock cylinder worn out or getting old. The TDM is most likely not locking the key ...

Ad

Question about 2005 Monte Carlo

1 Answer

...key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift ...

Question about 1998 Grand Am

1 Answer

pull the key out, it won't let go. It isn't such a problem in the winter months, but as soon as the weather is hot (Yuma, Arizona-it's ALWAYS hot) the problem returns. you can visit here..

...key won't release to the lock position The ignition barrel is faulty and needs to be repleced. on the steering column right under ignition is a round plug with a hole in the center, push a ...

WON'T COME OUT. CAN WE DRILL THROUGH THE PLASTIC HOUSING TO GET IT TO RELEASE? THE KEY OLD KEY WILL NOT KEY WILL NOT TURN IN THE IGNITION AT ALL. HAVE A NEW CYLINDER, BUT CAN'T GET THE OLD

...key. Why won't the key release when it is in park? Ignition switch won't release key when it is put in park. But when I removed switch and key tumbler, the key tumbler/cylinder releases ...

...won't Release the Keys, and it Will Run Down the Battery, if you Don't get the Keys Out of the Ignition !! AND My Car Does Not Have that little "Springie Dilliey" under the ...

...key won't turn to start car! I can't start my car, Key won't turn in the ignition pressed on brake attempting to release steering wheel but the ignition is locked can't ...

...key in the ignition and it won't turn ignition lock could be bad. also try turning the steering wheel a bit to release the pressure and then try the key. if it dont work, could be the ignition ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...