kenmore 4756 n21 error code how do i fix it N 21? If this is in the twenties then a drain or water issue is present. Looks like a he4 model so try this hit drain/spin and on spin speed select no spin,
Question about Elite 45986 Front Load Washer
Kenmore (417.40042990) goes off balance on spin cycle but on high spin it is bouncing just about hitting the sides and front to back. INSPECT SHOCK THREWING OFF BALANCE
...spin cycle HELP! Check the motor on the machine, make sure that the motor is not grinding on itself. If that is not it then check the tub and make sure when that spins that it is not hitting the side ...
i believe spring on bottom off the basket leans to the side, and of course then causes problems spinning out without hitting sides. Check the vibration damper rods for breakage, and the tub springs at
Question about 24632 Top Load Washer
...kenmore top loaded washer is moving freely, loud in spin The drum seems to be moving freely side to side, and is hitting the sides of the washer even with a small load. Are there shocks that can go ...
...Kenmore model 70 washer, but I'm having trouble getting the spin basket off of the drive block (assuming that's my next disassembly step). I've taken the agitator off and out, and have been applying ...
Question about 24632 Top Load Washer
...spin cycle Kenmore Elite model 110.20952991 Spin cycle sound like the basket is hitting the side sheets and makes a terrible noise. I don't see the side sheets actually move but it's the best ...
machine During the final spin cycle, the drum is hitting the back of the machine making a terrible noise. remove the bottom front panel (2 screws) look in and on the left and right side you should see
...Washing-Machine-Troubleshooting This model of washer does not have an out of balance cut off switch. If the load is not balanced properly the tub could hit the cabinet sides. If the unit spins evenly ...
Question about 24032\24036 Top Load Washer
...washing machine, Check drum dampeners are firm, any cables that were held by cable ties near the drum and were removed in order to remove the cables in order to access the drum need to be replaced ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions