Question about 24032\24036 Top Load Washer
Kenmore 80 series only 3 yrs old, won't, spin and the agitator appears to be stripped I have a Kenmore 80 Series Heavy Duty Super Capacity Plus washer machine model # 23812100. It's only about 3 years
Kenmore 80 series washer works but doesn't spin all the water out of the clothes on the last spin cycle. If I run the spin cycle again then it seems to get enough water out. It also makes a noise like
Question about 24902 Top Load Washer
Kenmore Series 80 washer doesn't always spin, only 1/3 of time. I've already had the switch replaced and it didn't fix it. First of all check to see if the motor is running, then proceed as follows: ...
Kenmore top load hqavy duty 80 series model 82980120 - how does one get to the drive belt. Washer motor hums but no action any cycle. Your complete model number including the first 3 numbers , is ...
Question about 24032\24036 Top Load Washer
Kenmore 80 Series Gas Dryer wont turn back on after blowing fuse Kenmore 80 Series Gas Dryer I just blew a fuse in my house and the washer and dryer went out. I fixed the fuse box. The washer turned ...
kenmore series 80 washer off balance hello, my kenmore series 80 (model 2088) washer is off balance during the spin cycle. This has happened after our last move. I have made sure the frame is level ...
...kenmore 80 series washer wont drain or spin. Hi, Problems with a washing machine not spinning or not draining are often interrelated.. If you are having a problem with your top load washer then check ...
...kenmore 80 series washing machine. During the second cycle it stopped working. It won't drain or spin. What should I do? If it doesn't pump water out or spin, check to see if the motor is running, ...
...Kenmore 80 series mod # 23822100 please help thanks With old washers and with new washers sometimes you have to get in there and tighten the belt or replace the belt. Your problem sounds like this to ...
Question about 23822 Top Load Washer
kenmore ultra fabric care 80 series washer that runs through the complete cycle including filling and draining water but won't agitate or spin. What can I do? The motor hums (not the normal sound) and
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions