Questions & Answers for: jeep trailer lights

Ad

Question about 1995 Grand Cherokee

1 Answer

...jeep and the trailer. The turn signals, brakes lights and flashers are not affected. After shutdown and a few minutes wait, the running lights will work again. try ...

Ad

jeep grand cherokee i installed a 4 way flat plug for a utility trailer. I installed as instructions said but have no brake lights on the trailer, Everything else works. can you help me? you will need

Ad

...trailer lights). I wired the trailer with the harness and installed the new lights. All of the lights work, but I have one problem. When I have the running lights on and then press the brake, the ...

...Jeep trailer towing wiring kit to the rear lights. the bought a long trailer wiring kit and ran it from the front of the Jeep to the Jeep tralier wire plug. Pluged it in and pluged the other end into ...

Question about 1998 Cherokee Grand 2WD

1 Answer

...trailer lights on my 1998 jeep grand Cherokee I would unplug the wire harness and check the contacts. Even if the contacts look good , Scrape them shiny then spray with electrical parts cleaner then ...

Question about 1999 Cherokee

1 Answer

jeep cherokee-hooked up to a trailer with electrical problem-I instantly lost dim headlight and both driver's side running lights. I suspect the running lights module. I found the replacement part

...jeep grand cheroke factory trailer plug is not getting a signal i know its a fuse but witch location? depends if the person , installing trailer setup used the factory kit or just cut in to your ...

...jeep goes out. the one trailer we just rewired. i also put in a new wiring converter in the jeep, as the previous one was bad. ( aftermarket) i would get a message on my jeep systems computer that my ...

...trailer plug on jeep doesn't appear to be a fuse The trailer connection is usually fed off the wiring from the brake and tail lights If those work, my guess is the wire that goes to ground is open. ...

...trailer is connected to my Jeep Liberty (a 4 wire flat), everything works fine except the 3rd brake light (I'm OK with that). When connected to the bike (5 wire flat), all lights works as designed. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...