Questions & Answers for: ignition switch won 39 turn

ignition switch can be faulty. Third will be the starter. If it's faulty, it won't kick the flywheel. One good reason why it won't turn over. Hope this helps and thank you for using FixYa!

...with your ignition switch. Basically what is happening here is that you are shutting off your vehicle, but the ignition switch is not working correctly and is allowing certain accessories to stay

terminals on the ignition switch by using a voltmeter. If there is voltage from the ignition switch, yoy may have a bad stator that is causing a no spark condition. Check that kill-switch is connected

t stay running. Checked the ignition module and it is fine. Car is getting spark. Done cars have a kill switch if they are low on oil. Check your oil. If the oil is good, it may be the ignition switch

...ignition switch on a Mercury topaz won't start My ignition switch on a Mercury topaz won't start or turn off the car. Its just were the car gets power. I can't pull my key out. I've tried ...

...ignition switch. what now?? 2004 buick rendezvous sometimes won't start. clicks but won't turn over. replaced starter, battery, and ignition switch. what now?? We just went through ...

...ignition switch.use test light see if power going to starter if not check ignition fuse to starter.if power going to starter, more likely starter solenoid or starter faulty.if ignition fuse okay and ...

...Ignition Switch, Distributor My 1993 Wrangler 4.0 liter will turn over but won't start. Sometimes if I disconnect the battery for 30 sec it will then crank but other times it won't. ...

...ignition switch.I suggest re-inspect the new ignition cylinder. For more help,click the help link mentioned below:----Ignition Switch Will Not Turn Off? ...

ignition switch won't turn I got it My 98 carrolla ignition switch won't turn I got it to work yesderday this morning won't work Hi Anthony,could be your neutral safety switch,here's a link on