Questions & Answers for: Honda XR 200 idle speed

...I would have to agree with the above answer..all the carbs i have repaired from Yamaha have the idle mixture screw clogged, and need to be soaked, and blew out with a air hose...if you can remove ...

...them with out taking them out and resetting the needles or just the pilot screw that makes it idle higher. The bike idles fine and it runs fune up to a certain RPM but when i try to open it up ...

HOW TO IMPROVE MY HONDA XR200R TOP SPEED THANKS. To improve top speed,one solution is to change your gearing, via the chain and sprocket set up. To gain more top speed, you need to replace your rear ...

I was riding on my xr 200 but it sudenly stopped, the cdi is ok, the battery is ok, the ingine idles, there is spark in the spark plug, the timing is ok, but it does not start. pls help The coil would

Honda XR 200 will not idle dies suddenly when cold Hi, Success97601 and the usual suspects are: 1. Fuel cap or fuel tank is not venting properly. 2. Fuel filter clogged. 3. Fuel line pinched or kinked

Should I turn the idle screw to the left or right to increase the idle of my Honda xr200? Hi Turn clockwise to increase & vice-versa Ride Safe Bike-Doc

...put it back if necessary. screw it back out to where it was, it will be about 1.5-- 2turns out. at idle as you turn it in the bike will start to bog down(getting richer) As you turn it out the revs ...

...choke is applied in the Up position. If you are having problems starting the bike try adjusting the idle and air adjustment screws. Idle is on the side and air is centered under near the float bowl. ...

...idle is now great the mid range is great but in high speed or high RPM the bike revs up and down. I took the carb apart cleaned it and made sure I did not miss anything. I took it for a test run but ...

...idle is now great the mid range is great but in high speed or high RPM the bike revs up and down. I took the carb apart cleaned it and made sure I did not miss anything. I took it for a test run but ...