how do i reset idle? Technically the idle speed is not adjustable. The computer controls idle speed with the idle speed control motor.Base idle is around 500 RPM with normal idle in park at 800
...idle speed screw. There may also be a high-speed mix screw. Try turning the idle speed screw in 1/4-turn at a time until it idles. If you turn it too far, the clutch will always be engaged so the ...
Question about Partner Gas Powered Cut Off Saw K960 16"
...idle speed drop a little. Back it out 1/4 turn and leave it alone. If the first 1/4 turn drops the idle speed, turn it OUT 1/4 turn and see if the idle speed rises more. When you get idle speed that ...
...idle speed, righty fasty, lefty slowy idle mixture, adjust in to get fastest idle speed. Once you go to far and the engine starts trying to stall , back it back a little to fastest/smoothest idle. ...
idle speed, the PCM commands the throttle closed reducing air flow into the engine and the idle speed decreases. In order to increase idle speed, the PCM commands the throttle plate open allowing more
Question about 2003 CR-V
idle speed at 160,000 mi, how is it done 2003 Honda CRV I do not have service manual. Therer are no issues with the crv. the maintenance schedule for 160,000 miles says to "inspect idle speed" nothing
Question about 2003 CR-V
the idle mixture screws first and then adjust the idle speed screw to compensate adjusting the idle mixture screws will alter the idle speed but when properly adjusted then adjust the idle speed screw
Question about 1985 Grand Marquis
IDLE SPEED ADJUSTMENT ON A 1985 MERCURY GRAND MARQUIS COLD IDLE SPEED IS VERY FAST AND WARM IDLE SPEED IS SLIGHTLY FAST COLD IDLE SPEED IS VERY FAST Do you have any codes? Did you change an air filter
Question about 1985 Grand Marquis
...idle speed on ford ranger 3.0 There is a base idle speed set at the factory . From sensor inputs the PCM - engine computer controls idle speed in all conditions . There is nothing for you to change ...
...idle speed and it is not adjustable at all. However, if it IS idling too fast then this means that the engine control computer has reached the limit of what it can do and the still too high of idle ...
Usually answered in minutes!
627 Questions
549 Questions
535 Questions
166 Questions
208 Questions