Questions & Answers for: hyundai intake inlet

Question about 2001 Accent

1 Answer

...intake hose (this is the hose that goes from the airbox to the inlet manifold) for a 2001 Hyundai Accent but I cant find the part number anywhere and I also don't know where to get one. Could anyone ...

Ad

...inlet/turbin speed sensor. i have bought the part but now i need to locate it on the transmission. but i dont know were to look. can you please help thanks Ben. Look on the engine, not the ...

Ad

...hyundai accent hesitates when accelerating.have to ease up on gas gentley runs fine on hwy driving stop and go traffic seems to aggrevate the problem engine light is on inlet manifold either loose or ...

...hyundai tuscan 2.7 v6.i cant see how to get to them without removing inlet manifold take off the stabilizer bar across the top of the engine (The one running from fender to fender) and the aluminum ...

Question about 2007 Santa Fe Limited

1 Answer

to stop bugs getting into air entake on adiesel to stop bugs getting into air intake on a diesel put a metal net outside air inlet

Question about 2007 Santa Fe Limited

2 Answers

Hyundai accent? These parts are located on your air intake. The air intake is a large tube connected to the engine. Be careful not to break them. They are very expensive. This located on the air inlet

and they are good. What could this be? It didn't start until it got really cold outside Inspect the top and bottom side of the air inlet tube. Hair line crack will allow additional air into the intake

Question about 2002 Santa Fe

1 Answer

Hyundai Accent GLS 2002 need torque settings for cylinder head - cam caps - inlet manifold, exhaust manifold and cam pulley - please help !! Head bolts are torqued in 3 steps, 1-18ft.lbs, 2-60 degrees

...intake, you have to remove the inlet boot to access the inlet side of your throttle body. Open the butterfly valve manually and spritz the starting fluid in. get back in the drivers seat then attempt ...

...Hyundai?. Defective spark plug, no injection, poor spray pattern, intake air leak, (slightly) poor inlet valve seat, compression leak, badly worn cam lobes or valve gear, broken valve spring, coolant ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...