Questions & Answers for: hold display

Ad

display ?IF NEW OIL HOLD RESET?. 4. Press and hold the RESET control to display OIL LIFE SET TO 100%. Your oil life is now reset. To reset the oil monitoring system to your personalized oil life %: 1.

Ad

...The manual above does help. I was really having trouble with the "HOLD" feature and the symbols displayed. Pressing the HOLD button repeatedly brings up the

Ad

...displayed, then release. 4.) Imediately press button once to display "HOLD RESET IF NEW OIL" and release. 5.) Imediately press and hold button for 2 seconds until "OIL LIFE SET TO 100%" is

...button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now

display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset. press the set up button and do a system check when it gets to the oil life press

...hold resetuntil oil life set to 100% and let button go you are done. if you have a message center dash display then do this one. 1)push and release setup button until you see press reset to begin ...

Question about 2008 F 250 Super Duty 4WD

2 Answers

...displays"press reset to begin system check" #2press and release reset button until cntr. displays"hold reset if new oil" #3press and hold reset button for 2 sec. and release oil life should read

Question about 2008 F 250 Super Duty 4WD

1 Answer

...hold the BAND and DISPLAY buttons to display the clock Press and hold the BAND and DISPLAY buttons until the time display flashes SEARCH left to adjust the hours; right to adjust the minutes Press ...

Question about 2006 Explorer

1 Answer

displayed, then release. 4.) Immediately press button once to display "HOLD RESET IF NEW OIL" and release. 5.) Immediately press and hold button for 2 seconds until "OIL LIFE SET TO 100%" is displayed

...hold TRIP/RESET button for 2 seconds and release to reset oil life to 100% 6. Message center will briefly display OIL CHANGE SET TO 100% With a message center cluster the procedure is as follows: 1. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...