Questions & Answers for: grand cherokeestraight6 lifters

Question about 2003 Grand Am

1 Answer

Grand Am 3.4. The lifter specs....I can tell you that its an Over Head Valve engine that utilizes hydraulic roller lifters. Specs are as follows: (2.1 inch by .8425 inch) Autozone part number - JB2270

Ad

...lifters on my 2002 jeep grand cherokee laredo that has a 4.0 liter in line six engine. I can not find where the lifters are located, I have been looking for a diaphram of the engine? remove valve ...

Ad

...grand cherokee laredo replace collapsed lifter 4.0l il6 Is their enough room to remove the lifter without taking the head off? What motor do you have? The V8, you can remove just the intake manifold ...

Question about 2001 Grand Cherokee

1 Answer

lifter tapping if a lifter is tapping in a jeep grande cherokee does the motor need to be replaced? or can the lifter just be replaced....... Yes, you can have just a lifter replaced, but it could be ...

...lifters on a 2002 jeep grand cherokee 4.0 depending all that is done about $300 dollars thats 12 lifters test 12 push rods replase rods $4.00 each rocker arm cover gasket oil filter and oil change ...

What could be making a loud clicking sound toward the back of the motor in a 2002 Grand Am and how can it be resolved. The only thing that could be making a loud clicking sound, is a bad valve lifter.

Question about 1996 Grand Am

1 Answer

What exactly are lifters? lifters ride on loped surface of the cam shaft the other end of the lifter a push rod sits on , when the cam shaft rotates the lifter moves up and down allowing the push rod ...

Question about 2002 Grand Am

1 Answer

...lifters I have a 2002 Pontiac grand am 3.4 v6 that I am replacing the head gaskets on and when I was taking off the rockers almost all were loose enough to rattle around by hand but couldn't be ...

How to adjust rocker arm on a 1997 Mercury Grand Marquis the bolt in the middle of it is not an adjustment its just torqued down tight . the oil in the lifter is the auto adjustment . if its tapping ...

I have a 96 grand prix with 3100 number one exhauste pushrod is not touching the rocker arm even when you torque to spec collapsed lifter and or worn cam lobe . ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...