engine turns has spark and gas want start Do a leak down test for leaks and check carb fuel, air, compression, and spark. if you have these, you have a working bike.
Question about GAS Motorcycles
...gas and nothing happens I have bypassed the electric push start because it quit working that worked for a year or so and then it just quit there is no clicking noise or anything audible and the pull ...
Question about GAS Motorcycles
Kodiak atv 700 wont start, has good spark, gas to carb, worked fine till I parked in garage, thereafter it will not fire a shot although it turns over; any suggestions ? Try changing the gasoline. It ...
Question about GAS Motorcycles
...now it doestn start it leaked some gas the fuel pump is working but doesnt start what can I do Most bikes have a mercury switch that when dropped it shut bike down you have to bypass it or replace ...
Question about GAS Motorcycles
am getting gas to carb, gas comes out from overflow, am not getting gas to cyllider? Is your main jet on carb clogged? Is your float mechanism working properly?
Question about GAS Motorcycles
...only ridden for 63miles around neighborhood. Then sat for about six months now wont start was told gas could be old. What to do Scooter wont start . Worked fine then sat for about six months now
Question about GAS Motorcycles
...carb mine keeps leaking gas bad it just flown out If the pin you're referring to is on the bottom of the carburetor, is the overflow line. And what's not working is the floating valve in the
ZNEN 150 Scooter Type F11 Gas type? My first bik I just want to know what type of gas to use Regular 86 or 87 octane gas will work fine.
Question about GAS Motorcycles
...and bled. peddle hard, start motor, goes to floor, turn off hard again. Plug for pressure sensor on gas tank loose, reinserted. do the bleed process again starting at the longest brake line first and ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions