Questions & Answers for: fuel primer

not stay running. I replaced primer bulb, fuel filter and all fuel and primer lines. you need to buy a primer bulb kit and replace it cost about $8.00 and is easy to put in, the check valve is damaged

...Primer Bulb to fuel hose to Fuel Tank Return hose. When correctly installed, the fuel will be PRESSED into the fuel tank via the return hose when primer is pressed in . . . and SUCTIONED out of the ...

...primer. IMO fuel primers on chainsaws are one more source of problems. In the USA ethanol additives attack fuel hoses. Without a primer routing is from the fuel tank directly to the carburetor and ...

fuel lines from primer bulb the fuel lines rotted off. The primer bulb seems OK. Which lint goes to the crab and which goes to th fuel tank, the long one in the center and the short one to the side. ...

...fuel into the primer bulb. That is the primer port that goes to the carburetor output connection. The other primer port connects to a short line that goes back into the fuel tank with no filter. ...

...bulb has a smaller diameter fuel line connected to it and connects to the nipple on the carb closest to the end with the hole in the cover. Built in primer has 2 fuel lines...externally mounted has

...primer pulls fuel through the carbruetor So take your return line from the carb. and hook it to the inlet side of the primer and the other side of the primer bulb transtions into the fuel tank. You ...

...fuel. Primer bulbs do not stay firm, as they are when initially pumped up, after the engine is running. There are check valves in the primer bulb that hold pressure in the primer bulb and throughout ...

...fuel. Some carburetors have the primer bulb built in and other uses a remote primer. The following is an example of the basic plumbing of the remote primer system. If your carburetor has the built in ...

...primer bulb, fuel will spurt out the bulb as you press the bulb If no fuel, move the line at the primer bulb to the other primer connection. Press primer bulb a few times and fuel should spurt out ...