Questions & Answers for: Dodge Dakota fuel level

...fuel level sensor input to the PCM is used to determine if the fuel level in the tank is correct to run the EVAP diagnostic tests. To ensure sufficient volume in the tank to begin the various ...

...fuel pump but the problem still remains. this is on a 2000 dodge dakota with a 5.9 ltr did you replaced just the float , because if the resistor that messures the level is not good you didn't do any ...

where is the fuel level sensor for a 1998 dodge dekota 3.9 In the fuel tank The fuel level sending unit for the gauge is located inside the fuel tank and is part of the fuel pump module.

...Fuel Level Sending Unit, or Fuel Level Sensor, is located in your gas tank with the Fuel Pump Module. The fuel gauge sending unit (fuel level sensor) is attached to the side of the fuel pump module. ...

...to empty.went to autozone and had them scan truck and these 2 codes are present. P0463 relates to circuit high input for fuel level sensorP0700 Is a MIL request - control system for ...

...replace the fuel tank fuel level sending unit. The sending unit is not sold separately from the fuel pump but as one assembly called the fuel pump module. Parts cost about $150.00 and 3 hours

...where the fuel level sensor is located Im trying to find out if the fuel level sensor is in the tank or located somewhere else. Thanks Fuel Level sensor is in fuel tank attached to fuel pump

...fuel level sensor circuit high input What do I need to do to fix this problem Most likely a faulty fuel level sender , mounted on the fuel pump module in the fuel tank. Recommend replace complete ...

fuel level float assembly and is inside the gas tank. You will have to drop the tank down and completely remove it from the truck. It has a white screw top cover ring that has to be unscrewed (counter

...has an arm attached to a float which raises/lowers depending on fuel level. The tank itself will have internal dividers that help prevent sloshing of the fuel. There is no module to control ...