Questions & Answers for: frozen clutch

Question about 2005 Sentra

1 Answer

...clutch was frozen the belt would be making a loud squalling noise, the belt would burn up shortly. Start your engine, turn on air conditioning, then open the hood, and do an eyeball inspection of the ...

Ad

Question about 1988 VT 1100 C Shadow

1 Answer

clutch is frozen from sitting in garage Clutch is frozen from sitting in garage This is a common problem that the clutch plates glue them selves together. You will need to remove the clutch outer case

Ad

...clutch as it slips trying to turn the frozen compressor .. if the compressor can be turned freely by hand then thats not the problem .. if the clutch is simply not being turned on then usually thats ...

Question about 1985 Bronco

1 Answer

...though- frozen clutch has to be warmed up and then driven a little to dry it If adjusting it get you no satisfaction then observe what you can and report back- the list of possible causes is long. ...

...frozen clutch? You could find out if the clutch is frozen or not by turning it by hand. Engine off. If not frozen it could be the fuse or it could be that there isn't enough refrigerant in the ...

Question about 1996 Caravan

1 Answer

...clutch frozen Clutch froz an elect. sparks givin out you got a bad clutch if you r still driving the car bypass the a/c unit with a smaller belt sometimes it is cheaper to change the unit than just ...

Question about 1992 Sierra K1500

1 Answer

clutch does not relax which means it is frozen. Try to spin it if it is hard to spin then it is frozen. Which in that mode your truck will not get hot but it is over working your engine. Since it does

Question about 1991 Wrangler

2 Answers

Clutch Pedal Frozen Need tech help 10 posts Sep 8, 2009 Clutch pedal stuck in the up position. 6 posts Jul 26, 2009 Any more to clutch adjustment? 10 posts Nov 28, 2008 More results from www.jeepforum

...clutch is not turning, it may also be a frozen bearing, if this part is the problem. If the crank pulley is turning, then the motor runs, and the problem is one of the other units that are driven by ...

...release If not , plates are probably frozen through excessive heat. Replace them. If lever does not move when clutch handle pulled, then adjust or broken cable. hope that' it, easier and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...