front and back, left and right lights will not blink. This has also stopped my flasher from working. I have checked my blinker flasher fuse and also my flasher fuse, both show ok. Hello I had the same
...front right works just fine though?! i just put in a new blub and flasher, I have a new multifunction switch but I don't know if thats a problem and would rather not install it to test and see if ...
Question about 2001 Explorer Sport Trac
...FRONT BLINKER OK) You may have to trace the wire from the blinker back . I am betting it is a cut wire in between the switch and the light. You can use a test light to go back tracing the wire until ...
...front right blinker bulb is on but won't blink unless i wiggle it around , and then it stops. The front left wont even blink atall ,it just stays on. Both back blinkers work fine. By the way , I did ...
...Are the lights coming on and just not flashing? Are the lights not coming on at all? Is the problem affecting both the front and the rear? Is the problem affecting both the Left and the Right
right blinker comes on along with the window brake light. But the front work normal just turn off when the brakes are applied. Sounds like a bad ground connection, probably in the back. You'll need to
...right rear turn signal bulb is blown.Replace the bulb and the fast blinking will stop. Check all four of the turn signal lights. Usually one of the bulbs is bad. Sometimes is lit but not flashing, ...
Question about 1999 Suburban
...front passanger blinker works just blinks very fast. Any ideas? The 3rd brake light and rear driver side brake light and blinker work just fine Any idea's ? Yes , learn how these system's work ! ...
Question about 1999 Suburban
front right blinker bulb stopped and now the low beam right side is out. replaced all four bulbs (both sides high and low) and right low beam and blinker still out. I work on cars and harleys have all
Question about 1999 Suburban
...blinker stopped working on my 2008 wildfire moped I thought it might be a blown fuse because the front and back stopped working at the same time probably a failed switch not working on the right ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions