Questions & Answers for: what is fixture wire

...the light fixture then you just have to remove the bulbs from the fixture and wire assembly remains intact then just fit the same bulbs in to the new light fixture without removing the wire

...wire was previously capped off), the fixture comes on but I am unable to turn it off with the pull-chain. Any advice would be appreciated. It sounds like you have accidentally by-passed the switch. ...

...fixture. Mark the white wire with a band of black electrical tape to signify it as a hot return line. This line becomes the switched hot line, and the fixtures are powered from this line. All can be ...

...fixture wire in that j box. -Turn the lights on. -If it trips, you know -(A)-the problem is in one of the three lights you still have connected and -(B)-if it stays on you know the problem is in the ...

wire nuts. Attach new light fixture wires same way as old was removed.Make sure black wire goes to black wire on light. White to white, green to bare copper.Copy and paste following links to see basic

...fixture wire. Remove this wire nut. At this point I usually use an electrical tester to double check that the power is off by touching one side to the newly exposed black connection and any grounded ...

...wire light does not work is it the dimmer switch on the fixture Check for 120Vac cming into the light fixture, if its there, the problem is your fixture, the fixture switch, or the way you wired it ...

...and by just capping it off, does it prevent the fixture from working? If the fixture does not work although wired correctly, something is wrong with the fixture. The green wire is for grounding

wire from the fixture which is connected to the silver screw are all connected together. The fourth white coming in from the four lines is connected to the brass screw of the fixture. Ends up with two

...ect). Check that you are actually getting power at the fixture (voltage tester, test light, multimeter) Check your wire nut connections (make sure each wire is secure in each wire nut). Hope this ...