Questions & Answers for: filling oil pressure washer

...oil in my 3000 psi Northstar pressure washer with a Comet pump.....Is there a rebuild kit, or a rebuild service available? Rick Franz I dont know which comet pump you have, but it is just easier to ...

...Washer, and I need to change the "engine" oil. There on two oil "yellow" fill point, and the manual talks about changing the pump oil. How exactly do I change the engine oil? Look for a drain plug on ...

oil on a pressure washer pump ry80030a The RY80030 Pressure washer has a Faip pump on it. There is no drain plug and you do not change the oil in it. The pump only holds 4.5 ounces of oil and the pump

...oil provided to fill crank case. Any pressure washer pump should be no more than half full. The reason is if you fill it completely up when the piston strokes it will blow the seals out of the pump. ...

...oil in my pressure washer and where thanks gasoline-powered pressure washer needs oil in two places. The pump and the engine. Please read your manual along with this information. Also stop by small ...

...2-cycle engine oil with the gas in a 40:1 ratio Pressure washer oil: Pump fills about half-way up with SAE20 or SAE30 non-detergent motor oil Engine fills half way up dipstick with 10-W-30 motor ...

pump oil change, how much oil There should be a drain plug (bolt) at the bottom of the pump to drain the oil. Undo bolt and drain the oil. Replace bolt and fill pump with new oil. Look for a ...

pressure washer. My old pump had an oil fill port on top and this pump doesn't. Does this pump use oil if so where do I fill it? Thanks That pump is ventless. They changed the design to keep water

...oil on the pressure washer pump. id your engine model and consult the briggs site........ the oil in the pump is filled during assembly so it doesn't have a nice pair of fill and drain plugs briggs : ...

Oil appears to have come out of the oil filler cap. Is this a sign of overfilling the oil, or something else? Someone else filled the unit with oil prior to me running it for about 10 minutes. Id ...