Questions & Answers for: evap vent

Question about 2000 Silverado 1500

2 Answers

...EVAP VENT SOLENOID and can i fix this without mechanic DTC P0446 Evaporative Emission (EVAP) Vent System Performance The vehicle control module (VCM) monitors the performance of the evaporative ...

Ad

...EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Hose/Evaporative Emission (EVAP) Canister Vent Asm) #02-06-04-037A - (02/02/2005) Models: 1999-2003 Chevrolet Silverado Models ...

Ad

...evap vent code where is the evap vent located Some might have an ses p0446, evap emissions vent circuit low. If you take it to the dealer they want 300-400.00 to fix the problem. GM has a service ...

Question about 2000 Sonata

2 Answers

EVAP System Vent Circuit Malfunction This diagnosis detects leaks in the Evaporative Emission (EVAP) purge line using of vapor pressure in the fuel tank. The EVAP canister vent control valve is closed

Question about 2004 Cavalier

1 Answer

...EVAP vent valve is likely stuck closed. The valve is under the car near the fuel tank. Remove the valve and check to see if it's stuck. You may be able to restore operation by cleaning the valve ...

Question about 1998 Frontier

1 Answer

EVAP Canister Vent Control Valve OpenPossible causes- EVAP control system pressure sensor and the circuit - Blocked rubber tube to EVAP canister vent control valve - EVAP canister vent control valve -

...EVAP vent valve stuck open: EVAP leak check pressure is lower than -0.14 kPa even if EVAP vent valve is operated from OFF (OPEN) to ON (CLOSE) with EVAP leak detection pump ON. EVAP vent valve stuck ...

...EVAP) Vent System PerformanceRefer to EVAP Control System Overview .System DescriptionThis DTC tests the evaporative emission (EVAP) system for a restricted or blocked EVAP vent path. The control ...

Question about 2001 Century

3 Answers

...EVAP Canister Vent Control Valve Close Possible causes - Faulty EVAP Pressure Sensor - EVAP Pressure Sensor harness is open or shorted - EVAP Pressure Sensor circuit poor electrical connection - ...

...connector (2) from the EVAP vent solenoid valve. Clean away any debris that may be present around the EVAP canister vent solenoid valve. Remove the EVAP canister bolt. Lower the EVAP

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...