Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...chainsaw. Have plenty of spark but no fire have a 32 cc poulan chainsaw. Have plenty of spark but engine doesn't fire. Using a fuel mix of 50:1. I Have the engine in the run position. Have removed ...
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...quits using a new spark plug. Why do you suspect the fuel system? Does the engine quit suddenly or sputter to a stop? Does the engine have to get hot before it will quit? Sudden stop is usually ...
Question about Featherlite Gas Blower, with Low Emission Engine, 150 M
will start but quits Fuel system needs checked and cleaned. Carburetor needs cleaned, diaphragm/gaskets replaced.
...quits, remove the spark plug and check for spark, which should be blue and snappy. If nothing, try another plug. If still nothing, the ignition module is likely failing with heat. Use a thin business ...
... Make sure the throttle plate in the bore is tight to the shaft. When the carburetor was off of the engine, did the gaskets and heat insulator seem to be ok? Any air leak behind the carburetor will ...
...i find a replacement air filter for my 21" poulan mower? no one seems to carry them. It's a honda engine. there should be a model number for the engine stamped on the mower somewhere. more than ...
...engine. Will it start and run another two minutes just after it quits? Try loosening the fuel cap to see if that affects the running time. When it quits, remove the spark plug to check for spark. If ...
Question about 25CC Gas BlowerVac
gas blower engine surges and shuts off when engine gets hot Poulan Gas blower surges and shuts off when engine gets hot. Runs about 10 minutes. Changed fuel filter, cleaned air filter, checked spark ...
quits. It will start again after it sits for about 45 minutes and I can cut wood for another 5 minutes. This happens over and over. I put new gas and a new spark plug in but it made no difference. Are
Question about 42-Inch Steel Deck 17.5 HP Briggs & Stratton I/C Engine With 6 Speed
How do I de-carbon the valves, head, and top of the piston on model 310707 type 0136-E1? Engine quit. Found intake pushrod broken in half and bent. Put in new pushrod and turned engine with valve ...
Usually answered in minutes!
583 Questions
457 Questions
255 Questions