Questions & Answers for: Nissan Maxima egr valve

...EGR valve. In case u are not aware, EGR stands for Exhaust Gas Re-circulation. What really this valve does is that it re-cycles some of the exhaust gases into the cylinder for combustion. The EGR ...

...egr valve I have a problem with my egr valve it doesn't open, it opens for like 2 seconds when i first step on the gas then it closes even though the engine is revving at 4000 rpm is this normal. hey ...

...EGR valve. Both can be tested for functionality before replacing them both. EGR valve is more likely I think. Cleaning it may not improve its performance, but its worth a try. Also check the vacuum ...

egr valve works fine. checked egr solenoid for resistance and it is fine. no lines are clogged. the code comes back. i am only getting 4 volts to the egr control solenoid instead of 12.6 or something?

...egr valve and 3 days later check engine I recently replaced my egr valve and 3 days later the check engine light is back on telling me something is wrong with the egr valve can u help me? put a new ...

egr valve malfunction To check the EGR system operation bring the Engine up to operating temperature and, with the transmission in neutral (parking brake set and tires blocked to prevent movement), ...

egr valve the code still flips any suggestions would be greatly appreciated The code p1400, is for an egrc solenoid valve, not the egr valve, they are 2 seperate items exhaust-gas recirculation (EGR):

...EGR valve may need to be replaced. Autozone has some ways to test your sensor and egr valve.If you do have a bad sensor it is about $170 average. If you have a bad EGR valve it is about $150 ...

...EGR valve opens, hot exhaust gases flow, and the temperature in the passage way changes. The EGR temperature sensor is a thermistor that modifies a voltage signal sent from the Engine Control Module ...

...egr valve Install a tachometer on the engine, following the manufacturer's instructions.Detach the engine wiring harness connector from the Idle Air Control (IAC) solenoid.Disconnect and plug the ...