Questions & Answers for: Mazda Protege egr valve

...EGR valve first take the egr valve off then get some carb cleaner spray it into the egr valve ports let sit 30-60min then take a small flat head clean any carbon left over in it. then check the ...

...egr valve on my 2003 mazda protege 5 This link is to a "How To Replace an EGR Valve" video. While he is doing this on a Ford F150 pickup, the tips he gives you should translate over to your Mazda ...

...egr valve on a 1999 mazda protege Hi, HOW TO INSPECT EGR VALVE Before attempting to troubleshoot or repair a suspected exhaust gas recirculation (EGR) system on a vehicle, the following conditions ...

egr valve located for mazda rotege5 were is the egr valve located 2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below the throttle-body. You must take off the Intake tube to get a

...EGR try to feel for the same tap if so the valve is working and not stuck closed. then in most case's yes you can clean the valve spray directly into the valve while pushing the valve up and down ...

...egr valve off and see if it needs cleaning or replacing. They get carbon build up around the lower pintle part, and may get stuck open or closed. Also clean the passages of carbon that the egr valve ...

...egr valve for a 1999 mazda protege? ...

egr valve located in a 1999 Mazda Protege? I believe it is located directly underneath the throttle body intake. https://www.google.com/search?biw=1536&bih=710&tbm=isch&sa=1&q=99+mazda

egr valve is open at all time i test a close one but the engine start to vibraye to much Make sure the EGR ports aren't clogged with carbon. It can completely clog ports. EGR shouldn't be open at IDLE

...egr valve install egr valve ...